Quote From a Random Guy - "ZOMG! A TORNADO! WHAT DO WE DO! MMM! I BUILT ONE BEFORE! I KNOW WHAT TO DO!!!"
Building a Wired Tornado
You Will Need -
2X2 PHX Plate
4 Hoverballs
A Slab of Wood (Very Thin) 1X10
A Wheel or Rotating prop w/ thrusters
Field Generator (Vortex Setting)
A Brain
Latest version of WireMod
Knowledge on How to Create a basic Wire Stalker
GPS
Alot of Cans
Trail Tool
STEP I: Lay the 2X2 flat! and place a hoverball on each corner.
STEP II: Place a wheel in the center of the grid on 2X2 (MAKE SURE ITS WIRED)!!!
STEP III: Place the slab of Wood or whatever a 45 degree angle on the edge of the wheel weld it onto the wheel
_____ /
EXAMPLE : (_____)/ <--- SLAB
STEP IV: Spawn a Vortex Field Generator in the center of the wheel, Apply it's values to...
Active - Input Switch or Button
Radius - Random Value (How Big you want it to be)
Multiplier - Random Value (How Strong you want it to be)
X , Y - Apply to the GPS (In Step 5)
STEP 5: Place a GPS at the edge of the wheel aswell. Then wire the X,Y values to the GPS. DO NOT USE Z!!!
STEP 6: Assemble the Plate into a Basic Wire Stalker (Required for Project - See top of page, Look for a tut on youtube)
STEP 7: Weld atleast 10-15 cans to the Wood Slab and apply a dark cloudy trail.
STEP 8: Turn on your tornado and have fun.
Video : This was a Server Im still admin on yet its having a ton of problems. Its dying (RIP Ruadhans Build) xD
Made by Brotherhood23
Building a Wired Tornado
You Will Need -
2X2 PHX Plate
4 Hoverballs
A Slab of Wood (Very Thin) 1X10
A Wheel or Rotating prop w/ thrusters
Field Generator (Vortex Setting)
A Brain
Latest version of WireMod
Knowledge on How to Create a basic Wire Stalker
GPS
Alot of Cans
Trail Tool
STEP I: Lay the 2X2 flat! and place a hoverball on each corner.
STEP II: Place a wheel in the center of the grid on 2X2 (MAKE SURE ITS WIRED)!!!
STEP III: Place the slab of Wood or whatever a 45 degree angle on the edge of the wheel weld it onto the wheel
_____ /
EXAMPLE : (_____)/ <--- SLAB
STEP IV: Spawn a Vortex Field Generator in the center of the wheel, Apply it's values to...
Active - Input Switch or Button
Radius - Random Value (How Big you want it to be)
Multiplier - Random Value (How Strong you want it to be)
X , Y - Apply to the GPS (In Step 5)
STEP 5: Place a GPS at the edge of the wheel aswell. Then wire the X,Y values to the GPS. DO NOT USE Z!!!
STEP 6: Assemble the Plate into a Basic Wire Stalker (Required for Project - See top of page, Look for a tut on youtube)
STEP 7: Weld atleast 10-15 cans to the Wood Slab and apply a dark cloudy trail.
STEP 8: Turn on your tornado and have fun.
Video : This was a Server Im still admin on yet its having a ton of problems. Its dying (RIP Ruadhans Build) xD
Made by Brotherhood23